Overview of DoseView ™ 3D
Customized Auto-Queues and 24 x 7 Support
Customized auto-queue scan sets were implemented with no cost for each customer. This time saving feature will save 8+ hours of work when setting up scans. Customers also have the flexibility to
choose the wizard-based or manual setup options to define their own scans. Custom scans created in
Auto-Acquisition mode can be saved and recalled for later testing. Those sets can be implemented,
edited, and organized on a TPS or custom basis to streamline commissioning and QA procedures.
Standard Imaging also provides 24 x 7 phone support for DV3D in USA.
Simplify Setup
Wireless pendant with 0.1 mm fine positioning facilitates automated alignment. Quickly switch
detectors without resetting the isocenter/origin. Integrated hardware, convenient software, and
wireless communication mean fewer cables and a fast setup. Easy and repeatable tank positioning
using the Precision Positioning Platform.
Accurate Measurements, Fast
Accelerate scan acquisition using low-noise, high-speed on-board electrometer.
Heavy gauge extruded aluminum frame maximizes rigidity, simplifies setup, and maintains reproducibility.
Positional accuracy and repeatability within 0.1mm per axis.
Versatility and fast acquisition with either step or continuous data collection.
Powerful Software, Quick Analysis
Intuitive wizard-based software allows saved scan routines in auto-acquisition mode. A
comprehensive suite of data management and manipulation tools. Acquire profile depth and PDD
data in the same sequence. Easily export scan data to TPS with all supported systems included. 24 x 7
phone support in the USA.
Motion Control System
REF Number
DoseView 3D REF 92260 DoseView 3D Lift and Reservoir Cart REF 72260
Measurement Speed
50 mm/s
Positioning Accuracy
± 0.1 mm per axis
Positioning Repeatability
± 0.1 mm per axis
PC Communication
Wireless or wired via RS-232
Control Method
PC or via wireless pendant
Water Phantom (Acrylic Tank Only)
Outer Dimensions
[ length x width x height ] 692 mm x 683 mm x 542 mm
Scanning Dimensions
[ length x width x height ] 480 mm x 480 mm x 410 mm
Wall Thickness
12 mm
Other
Replaceable Fill/Drain Port
Lift Cart and Reservoir
Outer Dimensions
[ length x width ] 1247 mm x 762 mm
Vertical Range
685 mm - 1185 mm (tank base to floor)
Water Pump
Electric fill, gravity drain
Water Capacity
60 gal (227 liters)
Fill Speed
6-7 min
Drain Speed
16-20 min
Precision Positioning Platform
X / Y Fine Adjustment
±12.5 mm
Fine rotational adjustment
±1°
Discreet engagement
10°, 45°, and 90° intervals
DoseView 3D Electrometer
Channels
2
Bias Voltage
0, ±150 to 450 (VDC) in 50 volt increments
Range
2 pC - 999,999 nC
Resolution
10 fC
Connector Type
Triaxial BNC or TNC (BNC unless specified)
Exradin® A28 Ion Chamber
Collecting Volume
0.125 cc
Centroid of Collecting Volume
4.47 mm from tip of chamber
Collector Diameter
1.0 mm
Outside Diameter of Shell
8.0 mm
Nominal Leakage
+/- 10 fA
Shell, Collector, Guard Material
Shonka air-equivalent plastic C552
Waterproof
Yes
DoseView 3D Software System Requirements
Operating System
Windows® 10 Professional, 64-bit Recommended
Processor
Intel® or AMD®, 350 MHz or greater
Memory
256 MB or greater
Hard Drive
30 MB or greater
Screen Resolution
1024 x 768 or greater
CD-ROM Drive
2X speed or greater
Connectivity
9-pin serial RS-232 port or USB port with USB to RS-232 adapter